Sunday 11 April 2021
  • :
  • :

Dos and Don’ts When Building with Timber

Dos and Don’ts When Building with Timber

Timber is an excellent building material. It is versatile, environmentally friendly, lightweight, affordable and non-toxic and it works well to form the skeleton to a building. Usually a building is made with a timber frame and then the walls are infilled with something else.

There are a lot of reasons to build with timber, including price, environmental impact and ease of use. This material can be used to build homes that will be practical, beautiful and durable and will last for many years. However, when you are building with timber it is important that you are aware of the following dos and don’ts so that you can avoid making costly mistakes that will delay the project.

Don’ts and Don’ts for Building With Timber

Here are some important things to keep in mind when you are building with timber from North Wales timber suppliers:

Building with Timber

  • Do make sure that the timber you are using has been sourced from sustainable forests with certification to prove it.
  • Don’t allow earth or other materials to pile up against the walls above the natural internal floor level when building with timer. It might be necessary to create drainage channels around a building to prevent this from happening.
  • Do keep in mind that sometimes timber requires structural steelwork to support loads that can be accommodated by masonry construction. This can cause additional issues when the timber frame shrinks as it dries out, but the supporting steelwork doesn’t.
  • Don’t be careless with fire. Timber houses are more of a fire risk than brick houses, so it is important to have common sense.
  • Do consider painting wood. Styles can come and go when it comes to finishes, but painting wood has always been one of the most classic and elegant ways to finish it throughout history. It’s also one of the most durable of all types of finishes.
  • Don’t sand the timber like crazy when you are finishing it. Sand it efficiently, keep it to a minimum and consider stripping rather than sanding.
  • Do treat cut ends with a preservative. Modern timber is preservative treated, but it is only fully effective if the timber is not drilled or cut.
  • Don’t cover the timber frame until the moisture content is at 20% or below, as this will lessen the possibility of wet rot. This is when the thermal insulation, plaster boarding and vapor barrier can be commenced.
  • Do keep in mind that apartments are vulnerable if they are built in timber frame, as thieves will be able to cut through the stud walls in the communal staircase area. Consider this and ensure that security measures are in place.
  • Don’t forget to place thermal insulation between the inner leaf studs, resulting in the air in the home being heated as well as providing insulation from noise.
  • Do make sure that you take your time and inspect every stage of the process, so that you can benefit from any cost savings and faster construction time.
  • Don’t ignore the problem if you spot wood boring insects – deal with the issue as quickly as possible. These insects cannot be eradicated simply by ventilation, they need to be dealt with by an experienced exterminator.
  • Do use a specialist surveyor if you experience problems with dampness in your timber home. Look for someone with the appropriate qualifications who is familiar with your type of property and shop around for competitive quotes.
  • Don’t forget that some buildings that are in low-lying areas with high ground water levels will be prone to dampness. This issue can be tackled by diverting the ground water away from the building. If there are downpipes that run straight into the ground you might want to consider installing rodding eyes to facilitate periodic clearing.
  • Do make sure that you are fully prepared for the project and that you have a plan of action before you start, so that you are not making mistakes along the way that are due to poor planning.

Building with timber from a timber merchant in North Wales has a lot of advantages, so in order to ensure that your building project goes smoothly it is important to consider these dos and don’ts throughout the process. These are important guidelines to follow whenever you are working with timber, no matter what type of building project you are working on.